Waterproof-Tile-Flooring-Itile-Bathrooms-NT

The Advantages of Installing Waterproof Tile Flooring in Your Home

You ideally want your home’s floors to last as long as necessary. However, you are aware that elements such as water and humidity can be dangerous to them. Floors are especially prone to water damage, especially in rooms like the bathroom, where an overflowing tub, a burst pipe, or the collapse of a floating vanity can instantly become a costly hassle. 

You can use materials that are resistant to these components on your floors to ensure that it remains preserved and beneficial. When you are using waterproof tile flooring adhesive to secure your floors, you can have peace of mind.

Why Is Shower Tile Waterproofing Necessary Before Installing It?

Tile’s water resistance makes it the recommended material for moisture-prone areas such as bathrooms, tub surrounds, and tile flooring. However, there are two possible issues to consider when implementing tile in wet and humid surroundings: water vapor that can disperse into the walls or floors and bulk liquid that can come from leaks. 

Water vapor is an unseen foe that can travel through tile settings and start causing moisture issues without being detected. While bulk water can occasionally evaporate and exit through the air handling systems, any remaining liquid generates ideal conditions for mold and mildew to develop.

It is a bad decision to completely ignore water insulation systems when installing tiles in the most humid rooms of a house, particularly in showers and steam rooms. If you don’t have the perseverance for insulation or genuinely assume that tiles are impenetrable, think twice! Keep in mind that water insulation systems are comparatively cheap in comparison to the expenses you will incur later on.

Key Advantages Of Installing Waterproof Tiles In Your Home

1. Avoiding Slips And Falls

You can prevent yourself from falling when you walk on tiles by using waterproof tile flooring adhesive in your household. Water can cause your floor tiles to come undone if it starts getting under them. Because the tiles are no longer adhered to the floor, you may slip and fall when walking over them. 

When you are using waterproof tile flooring adhesive, you can maintain the floors in position even if water comes under the tiles. You can comfortably walk across your floors, knowing that they’ll never slip out of place and cause you to fall.

2. Ability To Adapt

Another important feature of waterproof tile flooring adhesive is its adaptability. It can be used on floors throughout your home, especially in areas with high humidity and moisture. You can, for instance, use this to lay the floors in your home’s utility room. This room could house your washer and dryer, both of which produce heat and humidity that can potentially harm your flooring. You can use waterproof tile flooring adhesive to keep the floor in your utility room from bubbling, scrunching, or looking loose.

In the same way, waterproof tile flooring adhesive could be used in your finished basement. If you intend to successfully complete your basement and build a family room or bedrooms in it, you should use water-resistant equipment. You can keep the floors in position even if the basement has become humid or wet by using waterproof tile flooring adhesive. Waterproof tile flooring adhesive is intended to last about many years. You can use this to secure your floors without needing to worry about having to adjust new layers to keep them in good condition.

Waterproof tile flooring adhesive has a number of benefits for your home. It keeps floors protected even when water gets underneath them. It is also adaptable enough to be used in a variety of rooms and has a long lifespan.

Keep The Waterproof Tile In Good Condition

A water-resistant floor material, such as waterproof vinyl or tile, has the added benefit of being easy to clean and maintain. Spills can be wiped away easily, and stains from common bathroom products, such as soap residue, can be treated with a steam mop.

Itile Bathrooms NT is a Waterproof Tile Accredited Installer. When you hire us, you are guaranteed not only high-quality materials, but also high-quality service. Our knowledge complements our commitment to completing the best waterproofing projects for you.

We have over 20 years of experience in Darwin, Palmerston, and Humpty Doo, providing a full range of demolition, waterproofing, and tiling services. Contact us today with your questions, and our team will gladly assist you:

post-images-resized-04

Top Questions & Answers on Tiling & Waterproofing

Even before the pandemic, more people are becoming enthusiasts of home repair and renovations. Who doesn’t want a comfy, well-built, and repair-free home? Among the top projects when it comes to home building or repair is tiling and waterproofing.

Our team gathered the common questions being asked about this subject. Through our collective years of expertise in the industry, we will provide you with the best answers possible.

Will waterproofing and tiling take long to do?

It will all depend on several factors, which include your budget, the number of people for the job, and their expertise.

On average, it should only take about a week to complete waterproofing and tile installation. But you should be aware that there are waiting times involved to complete the entire waterproofing process and setting of tiles.

Who are the experts for this project?

There are myriads of tutorials on the Internet today about basically everything. And that includes waterproofing and tiling. However, like with most home projects, one cannot rely on the Internet.

To get the best results and return on your budget, hire only the qualified tradespeople to do the job. These include:

Builders. They are mostly a complete package. They know what to do and how to do it best.
Licensed waterproofers. “Licensed” is important so you know that they went through comprehensive training.
Tilers. They are the master of their craft. You can be sure that your home tiles are appropriately installed.

Can I opt out waterproofing?

A big no. Whether in residential, commercial, or any other spaces, there will always be wet areas. This is why you can’t remove waterproofing in your checklist when it comes to construction or repair.

If you don’t want to have your structural timbers rot easily from the water leaking into the floor and walls, include waterproofing. Moreover, you surely don’t want to spend terribly for repairs that could have been prevented early on. No wet areas in any property should be left non-waterproofed.

Is there DIY waterproofing?

Of course there is and as we said earlier, tutorials abound on the Internet. But, we don’t recommend it.

In Queensland and New South Wales, you can have DIY waterproofing only if you are licensed to do the job. Not all states and territories require a license to handle waterproofing. However, the person you will hire to do it needs to present a written assurance that the work is fully compliant of the Australian Standard A 3740-2010 – ‘Waterproofing of domestic wet areas’.

Apart from all these, DIY should still be approved by a building inspector. Also, it may affect your insurance or warranty claims later on.

The requirements are strict because in Australia, poor waterproofing has brought huge damages to many properties in the past. You need to make sure that the right people are doing this job so you can prevent any serious damage and unwanted repair costs in the future.

How is waterproofing done?

Waterproofing here in Australia normally starts with applying a liquid rubber membrane on areas where water is present. This is an approach to seal the area against any water seepage.

With the use of “neutral cure” silicon, the first areas to be sealed are the edges and corners. A ‘polyfab’ bandage or polyester fabric is also applied to create a ‘bond breaker’.

The bond breaker is flexible and it aids in decoupling the waterproofing membrane at joins. This way, any small movements on the area will not destroy the membrane. It is also needed around penetrations through the waterproofing membrane, like tap outlets and drains.

Normally, the waterproofing membrane is applied under the edges of the bandage. This is to ensure that it is deeply submerged and appropriately adhered to the wall or floor. After which, using a roller, the membrane is painted on the walls and floors. Two coats are used: the second coat is rolled at right angles to the first coat. 

Which areas require waterproofing?

Every space where there’s a water outlet needs waterproofing. Basically, these are:

  • Bath area
  • Bathroom
  • Laundry area
  • Shower stall
  • Kitchen wet area
  • Taps, drains, etc.

The materials used in the area to be waterproofed will determine how high and wide the walls and floors will need to be waterproofed. For instance, in shower recesses, the normal waterproofing height is 1800mm. To determine how far the waterproofing membrane needs to extend on the wall and floor are based on these factors:

  • Shower stall size
  • Shower stall enclosure structure
  • Used of pre-moulded base

Same thing with the materials used on the bathroom floor, it will determine the requirements for waterproofing in this area. If a fibre cement floor is already in use, the concrete floors may be able to offer some sort of water resistance. However, if the floor is made up of timber-based materials like plywood or particleboard, full waterproofing is required.

How are tiles installed?

Tiling is made after the installation of waterproofing membrane. The mortar bed or screed for the shower needs to be installed first before tiles are put up.

These are the general stages of tiling process:

  • Selection of tiles – Different designs may be used on floor and walls. But you need to consider their slip resistance.
  • Tile pattern – Careful planning is needed on where the first tiles will be installed, and how they will be aligned with the floor and wall joints.
  • Tile cutting – They need to fit on the areas where it will be applied.
  • Application of thin set mortar or tile adhesive
  • Allowance for the setting of tiles
  • Removal of spacers between tiles
  • Application of grout on gaps
  • Clean up of remaining grout and debris
  • Waiting for grout setting

Tiling and Waterproofing Experts in Darwin

If you are in Darwin and you need tiling and waterproofing works, iTileNT is your best service provider.

We have more than 20 years of experience in tiling and waterproofing and have been serving the areas of Darwin, Palmerston, and Humpty Doo. iTileNT is a licensed wall and floor tiler and waterproofers.

Our team is more than capable of full bathroom renovations, from tile demolition, waterproofing, tiling, plumbing, to remedial waterproofing. You can be assured that our years of expertise can cover all your need for remedial waterproofing, including leaky balcony and shower and tile free bathrooms.

iTileNT also offers Clear Slip Resistant Coating to make any surface slip-resistant while retaining its appearance.

Call our friendly staff today and get a free quote:

+61 400729303
info@itilent.com.au
15 Wulagi Crescent, Darwin NT 0812