Replacing Bathroom Tiles

What Procedures Must You Follow When Replacing Bathroom Tiles?

Shower tiles that are broken or cracked can let water and mould into your bath walls, therefore they should be replaced or repaired right away. Changing bathroom tiles can be a tough and time-consuming process, so prompt action and extensive understanding are required.

What to Consider When Replacing Bathroom Tiles?

Remove Any Fixtures That Enclose Your Tiles To Avoid Damage

If you don’t feel at ease removing the fixtures yourself, hire a plumber or a contractor to accomplish the job for you.

To Minimize Damage, Cover Your Workstation and Drain With a Drop Cloth

If you’re replacing bath tiles, make sure the tub drain is fully covered. Tiles that fall might tear or ruin your bathroom or the flooring beneath them. Lay a drop cloth over the entire place where you’ll be working and bind it using painter’s tape.

Using a Grout Removal Tool, Cut Through The Grout Around The Tiles

Grout removal tools contain saw-like teeth that quickly cut through grout to make removal simpler. Begin by pulling the blade straight across the grout from one corner of the tile. Pry the tile out of position by cutting through each line of grout around it.

Using A Hammer And Flat Chisel, Pry The Tiles Away From The Wall

Keep the end of a flat chisel at a 30-degree angle against the tile’s edge. Tap the chisel’s opposite end with a hammer to push it under the tile and off from the wall.

Using A Metal Scraper, Remove Any Remaining Adhesive

Using a metal scraper or flat chisel, remove all of the mortar from your wall and exert firm pressure to lift up the adhesive. Continue scraping until you have removed as much as needed before going on.

Brush The Drywall To Maintain A Clean Application

Sweep away any dust or dirt from the area with a stiff-bristled shop brush. Continue brushing the wall until you notice no more dust being lifted up.

Design And Examine The Tile Layout

Make a note of the size of the area where you intend to reinstall new tiles. Determine how many tiles you will require for your space. To make the room more aesthetically appealing, line up your new tiles in a grid pattern or offset them slightly.

Bathroom-Tiles-Replacement

Using A Square-notch Trowel, Apply A Thin Coating Of Tile Mortar To Your Wall.

Scoop a huge blob of tile mortar from the container and apply it to the wall. Drag the edge of a square-notch trowel over the mortar to create grooves that will allow the mortar to expand when you press a tile into it.

Push The Tile Into The Mortar To Secure It

Add pressure to the full surface of the tile to ensure an even mortar layer on the back, and then tightly press it against the wall to ensure it sticks.

Install the Remaining Tiles On The Wall, Leaving Spacers Between Them

Work in horizontal rows from bottom to top to ensure that the tiles are even and level. Place 1-2 spacers on each side of the tiles to keep them at a consistent spacing apart. Allow the mortar to dry for 24 hours before installing them.

 After The Mortar Has Set for 24 Hours, Put Grout to Your Tiles

To get the grout into the spaces between the tiles, use a rubber grout float, which is similar to a squeegee. Begin at the edges of your tiles and draw the float diagonally across the edges to force the grout within.

With a Clean Sponge, Remove Any Remaining Grout

Clean the surface of the tiles to remove any grout that has become attached to them.

Once The Grout Has Dried, Reinstall Your Fixtures

Reattach the fixtures by repeating the removal procedure. Make sure they’re securely fastened to the wall so they don’t leak or damage the tiles.

 There are numerous things that may go wrong while replacing a shower room tile, so you should simply call experienced bathroom renovators to ensure that your bath area is free of leaks and damage. Itile Bathrooms NT specialises in bathroom renovations in Darwin, Palmerston, and Humpty Doo. Has many satisfied clients around the Northern Territory, so if you need any bathroom work, such as replacing your bathroom tiles, please contact us and we’d be happy to offer you our exceptional service.

Wall Tilers

What You Should Know About Hiring A Wall Tiler

This is the best article for you if you are still confused about the work of wall tilers or if you didn’t even know what a wall tiler was. This blog will explain and provide you with useful information that you can use if you decide to hire a professional wall tiler. This article will tell you all you need to know about wall tilers. This can also be used as a guide to find the best wall tilers in Darwin, Australia.

About Wall Tiling

Wall tiling is commonly used in damp locations where moisture should not be allowed to penetrate the wall substrate, such as kitchens, restrooms, and laundries. Tiles are an excellent choice for walls because there are many different kinds of tiles that may be laid in different patterns or as feature tiles. There are many colours to choose from, and they are also incredibly sturdy and easy to clean. Just ensure the tiles you choose are appropriate for walls, since weight might be an issue on some substrates.

Why Is It Recommended To Hire A Professional Wall Tiler For Wall Tiling?

Most wall tiling jobs should be done by a tiler. This is due to the fact that they are totally qualified and experienced. Wall tilers specialise in the installation of clay, ceramic, marble, and glass tiles on both indoor and outdoor surfaces for both protection and decoration. A trained wall tiler will also guarantee that the tiles you have chosen for your shower room will look amazing, so rather than handling wall tiling by yourself, you should consider hiring a wall tiler. 

Here Are Some Of The Tasks A Wall Tiler Would Do For Your Restroom.

  • Removing outdated tiles, grout, and adhesives from walls; filling gaps and cracks; and cleaning surfaces
  • Laying out work while measuring and marking surfaces
  • Used tile cutting tools to cut and shape tiles for edges and corners, including around objects such as fittings and pipelines.
  • Putting in waterproofing systems
  • Applying adhesives on prepared surfaces and installing tiles
  • Could instal flooring made of granolithic, terrazzo, cement, or a similar material.
  • Assuring that tiles are appropriately positioned and spaced
  • Grouting tiles, cleaning and removing extra grout.

Where Can You Find Australia’s Greatest Wall Tilers?

Itile Bathrooms NT is an excellent solution for the work. Itile Bathrooms NT are bathroom remodelling professionals in Darwin, Palmerston, and Humpty Doo, so you can engage them not only for wall tiling but also for a full bathroom restoration. Because their company has serviced many satisfied clients throughout the Northern Territory, you can be certain of the best service. If you require any bathroom work, you can contact them, and they will gladly provide you with their exceptional service.

These tilers will guarantee that your wall has been properly prepared and is level for tiling. Itile Bathrooms NT will use the proper tile adhesive and ensure that the tiles are properly spaced. They can also cut tiles in such a way that the pattern of the wall tiles is preserved as much as possible while minimising waste. You will not be worried if you hire Itile Bathrooms NT as your wall tilers. For additional information, call us at 0400 729 303.

 

bathroom renovation - itile bathrooms nt

Basic Guide to Understanding Bathroom Renovation

Bathroom renovation is essential, especially if your shower room is deteriorated, broken down, or too old to use. However, some people continue to dismiss the idea of shower renovation because they believe it is a waste of money, has no benefits for them, or they don’t have any idea how to start remodeling their restroom. In this article, we will discuss the importance of renovating your washroom and provide some tips, with the hope that after reading this, you will consider renovating your bathroom.

What Exactly is a Bathroom Renovation?

A bathroom renovation is the act of renewing; of creating something new after decay, destruction, or deprivation; of restoration. A restroom renovation, according to this definition, is the revamping or installing of bathtubs, showers, surrounds, tile, sinks, vanities, toilets, flooring, and even towel bars. This may be referred to as a shower upgrade by some contractors. 

Renovation is more concerned with restoring something old to good condition. It is a method of making huge changes to the layout or design of a room, as well as all major and minor improvements that help rebuild or increase the functionality of your washroom.

Importance Of Bathroom Renovation

bathroom renovation guide - itile bathrooms ntMaking a Lasting Impression

If your washroom is old fashioned and filthy, it will undoubtedly leave a negative impression that will make visitors think twice about returning to your home. Remodeling or renovating your shower conveys cleanliness and proper hygiene. Your restroom should be the last thing you need to be ashamed about.

Make Design Changes

Many people do minimal bath remodels to make a few minor adjustments and revive the look of the bathroom. Even if your restroom is still fashionable and up to date, it may be in need of renovations.

Better Accommodation For Elderly Relatives or For Yourself

As you get older, you may find that you need to implement changes to your restroom for better and easier accommodation. For example, you could add rails and a ledge to your shower so if an older relative, such as a parent, is moving in with you they won’t have a hard time using the shower room.

Tips In Bathroom Renovation

Choose The Appropriate Flooring

Pick a restroom flooring that is tough enough to withstand the rigours of daily bathroom use. Ceramic and porcelain tile, luxury vinyl planks, and vinyl tiles are popular bath flooring options.

Increase The Number of Mirrors in the Bathroom

Mirrors are useful in washrooms because they represent design features, visually expanding the space and adding light. Many residents like to add a second mirror above the shower room sink in addition to the main mirror above the sink. In smaller rooms, use huge mirrors that cover the full wall.

Adjust Room Size With Colour

Keep your colour scheme in the white-or-light shade scale to make a small shower room appear larger. Dark hues make the room appear tinier and more stuffy. Use white or light-colored lighting fixtures (that is, the toilet and bathtub). Never paint your washroom ceiling any shades other than white or off-white, as this appears to shrink the space even more.

Choose The Best Bathroom Renovators

If you want to achieve your ideal restroom look, you must hire a professional bathroom renovation specialist. Itile Bathrooms NT’s skilled team can tile and renovate your bathroom appropriately. We specialise in bathroom renovations in Darwin, Palmerston, and Humpty Doo, and our company has many positive reviews throughout the Northern Territory. Please contact us (0400) 729-303) if you require any bathroom work, and we will be thrilled to provide you with our unmatched service. 

bathroom renovation services - itile bathrooms nt

Tips and Ideas for Your Bathroom Renovation

A bathroom renovation can significantly increase the value of your most valuable asset. Thus, turning your bathroom into a modern design can significantly improve the value of your home. While you are renovating your bathroom, It is ideal to select the appropriate design, layouts, color palettes, fixtures, and facilities to reflect your personal taste. Overall, it should provide you with comfort or soothe you after a long and stressful day. 

Following extensive research and planning, we have compiled a list of bathroom renovation ideas to transform a bland space into a relaxing and luxurious retreat. Keep these ideas in mind as you design your ideal bathroom.

Try These Creative Bathroom Renovation Tips And Ideas 

1. Create an effective strategic plan. Configuring the sink and toilet, allowing space for a shower, and trying to fit amenities into a small bathroom can be difficult. So, before you start breaking out the first tile, think about what you want to obtain as well as the cost of your renovation project. If you want to turn your bath area into a personal home spa, a spacious spa tub, an attractive shower head, decorative objects, brightly coloured shower curtains, and scented candles should be at the top of your wish list. Finding inspiration from blog posts, Pinterest, and even creating your own moodboard is a great way to get ideas and style direction.

2. If you’re considering a repair or improvement but are limited by finances or time, there are several ways to rearrange and redevelop your rest room without requiring massive demolition. If you’re aiming to make some minor changes that will have a big impact, consider a simple refresh like a vanity replacement, new fixtures, or perhaps the installation of some new tiles. If you’re planning a complete renovation, you can customise your floor and wall tiles, vanity, cabinetry, and fixtures to match your signature style. These elements of your enhancement can be coordinated to fit your budget and time frame.

3. When considering a bathroom renovation, it’s best to consult with a professional, such as Itile Bathrooms NT, that can manage the project and ensure that it’s as safe and well-designed as possible.

Tips For Bathroom Enhancement

  • Floor-to-ceiling tiling or wall panels adds an instant touch of elegance.
  • A neutral color scheme can be glammed up with textured tiles or mosaics and styled with colorful towels and decorative items. This keeps your bathroom flexible and long-lasting.
  • Decorate with houseplants to add life and freshness to the space. 
  • A standard statement piece can provide the desired wow factor without spending a lot of money. Consider a backlit mirror, a wood vanity, and an elegant floor lamp.
  • Consider the importance of lighting and natural ventilation. A skylight, a picture window looking out to a private green space, and a high window that can be opened but does not interfere with the floorplan. Think about your options carefully.

Elegant bathrooms increase the value of a home. So if you’ve been thinking about renovating one, now is the time. Itile Bathrooms NT can renovate a bath area that accommodates any style or special needs. Work with professional bathroom renovators in Darwin, Palmerston, and Humpty Doo. 

Our team of professional bathroom renovation specialists will vividly bring your bathroom renovation ideas to life, regardless of the size of your space. Simply call us at 0400 729 303 or request a quote, and we will do the job for you while providing excellent service.

bathroom tiling services - itile bathrooms nt

Should You Hire a Professional Tiler For Bathroom Tiling?

Bathroom tiling is a time-consuming task. It cannot be completed quickly without the assistance of professional tile setters. From repairing loose toilet tiles to installing shower wall tiles, you’ll need an expert tiler to get the job done right.

Is It Really Necessary To Hire A Professional Bathroom Tiler?

A good tiling job will increase the value of your home. Having an experienced bathroom tiler carry out the work for you is a must if you want to get much more out of your bathroom or en-suite in terms of both looks and value.

The tiling in your bathroom is very important as it is the first thing that people notice when they walk in, especially in the modern bathrooms that are tiled from floor to ceiling. A poor tiling job can seriously damage the entire bathroom. If you are building a new home, you want it to be perfect. This is the most common room to get a makeover when renovating.

Even the most costly tiles will not conceal poor workmanship if the bathroom tiling is not done with care and diligence. This is where Itile Bathrooms NT’s professional bathroom tilers can really thrive.

Bathroom Tiling Professionals

Itile Bathrooms NT specialises in bathroom tile installation and has received numerous excellent feedback. We undoubtedly work to the fullest capacity to ensure that our reputation remains high. Our team can easily execute any tiling work, whether this is a shower floor tile, bathroom wall tile, shower regrouting, or any other tiling work. We work hard to keep a good image and to ensure that all our work is of the highest quality.

Our positive attributes include great workmanship at a low price. So if you are intending to renovate your bathroom but don’t have someone to set your tiles, our company is the best group of tilers for you.

Itile Bathrooms NT provides the highest quality tiling services in Australia. We offer tiling installation and remodeling services for small and large projects in both residential and commercial fields. We work hard to just provide high-quality bathroom tiling renovations, while also ensuring complete customer satisfaction. Simply call us at 0400 729 303 or request a quote, and we will do the job for you. The tiles we install are of high quality. We will make certain that the grout is neatly applied to each tile and that the number of wasted tiles is kept to a minimum. You will not be making the wrong decision if you select one of the best bathroom tilers in the industry.

Waterproof-Tile-Flooring-Itile-Bathrooms-NT

The Advantages of Installing Waterproof Tile Flooring in Your Home

You ideally want your home’s floors to last as long as necessary. However, you are aware that elements such as water and humidity can be dangerous to them. Floors are especially prone to water damage, especially in rooms like the bathroom, where an overflowing tub, a burst pipe, or the collapse of a floating vanity can instantly become a costly hassle. 

You can use materials that are resistant to these components on your floors to ensure that it remains preserved and beneficial. When you are using waterproof tile flooring adhesive to secure your floors, you can have peace of mind.

Why Is Shower Tile Waterproofing Necessary Before Installing It?

Tile’s water resistance makes it the recommended material for moisture-prone areas such as bathrooms, tub surrounds, and tile flooring. However, there are two possible issues to consider when implementing tile in wet and humid surroundings: water vapor that can disperse into the walls or floors and bulk liquid that can come from leaks. 

Water vapor is an unseen foe that can travel through tile settings and start causing moisture issues without being detected. While bulk water can occasionally evaporate and exit through the air handling systems, any remaining liquid generates ideal conditions for mold and mildew to develop.

It is a bad decision to completely ignore water insulation systems when installing tiles in the most humid rooms of a house, particularly in showers and steam rooms. If you don’t have the perseverance for insulation or genuinely assume that tiles are impenetrable, think twice! Keep in mind that water insulation systems are comparatively cheap in comparison to the expenses you will incur later on.

Key Advantages Of Installing Waterproof Tiles In Your Home

1. Avoiding Slips And Falls

You can prevent yourself from falling when you walk on tiles by using waterproof tile flooring adhesive in your household. Water can cause your floor tiles to come undone if it starts getting under them. Because the tiles are no longer adhered to the floor, you may slip and fall when walking over them. 

When you are using waterproof tile flooring adhesive, you can maintain the floors in position even if water comes under the tiles. You can comfortably walk across your floors, knowing that they’ll never slip out of place and cause you to fall.

2. Ability To Adapt

Another important feature of waterproof tile flooring adhesive is its adaptability. It can be used on floors throughout your home, especially in areas with high humidity and moisture. You can, for instance, use this to lay the floors in your home’s utility room. This room could house your washer and dryer, both of which produce heat and humidity that can potentially harm your flooring. You can use waterproof tile flooring adhesive to keep the floor in your utility room from bubbling, scrunching, or looking loose.

In the same way, waterproof tile flooring adhesive could be used in your finished basement. If you intend to successfully complete your basement and build a family room or bedrooms in it, you should use water-resistant equipment. You can keep the floors in position even if the basement has become humid or wet by using waterproof tile flooring adhesive. Waterproof tile flooring adhesive is intended to last about many years. You can use this to secure your floors without needing to worry about having to adjust new layers to keep them in good condition.

Waterproof tile flooring adhesive has a number of benefits for your home. It keeps floors protected even when water gets underneath them. It is also adaptable enough to be used in a variety of rooms and has a long lifespan.

Keep The Waterproof Tile In Good Condition

A water-resistant floor material, such as waterproof vinyl or tile, has the added benefit of being easy to clean and maintain. Spills can be wiped away easily, and stains from common bathroom products, such as soap residue, can be treated with a steam mop.

Itile Bathrooms NT is a Waterproof Tile Accredited Installer. When you hire us, you are guaranteed not only high-quality materials, but also high-quality service. Our knowledge complements our commitment to completing the best waterproofing projects for you.

We have over 20 years of experience in Darwin, Palmerston, and Humpty Doo, providing a full range of demolition, waterproofing, and tiling services. Contact us today with your questions, and our team will gladly assist you:

post-images-resized-04

Top Questions & Answers on Tiling & Waterproofing

Even before the pandemic, more people are becoming enthusiasts of home repair and renovations. Who doesn’t want a comfy, well-built, and repair-free home? Among the top projects when it comes to home building or repair is tiling and waterproofing.

Our team gathered the common questions being asked about this subject. Through our collective years of expertise in the industry, we will provide you with the best answers possible.

Will waterproofing and tiling take long to do?

It will all depend on several factors, which include your budget, the number of people for the job, and their expertise.

On average, it should only take about a week to complete waterproofing and tile installation. But you should be aware that there are waiting times involved to complete the entire waterproofing process and setting of tiles.

Who are the experts for this project?

There are myriads of tutorials on the Internet today about basically everything. And that includes waterproofing and tiling. However, like with most home projects, one cannot rely on the Internet.

To get the best results and return on your budget, hire only the qualified tradespeople to do the job. These include:

Builders. They are mostly a complete package. They know what to do and how to do it best.
Licensed waterproofers. “Licensed” is important so you know that they went through comprehensive training.
Tilers. They are the master of their craft. You can be sure that your home tiles are appropriately installed.

Can I opt out waterproofing?

A big no. Whether in residential, commercial, or any other spaces, there will always be wet areas. This is why you can’t remove waterproofing in your checklist when it comes to construction or repair.

If you don’t want to have your structural timbers rot easily from the water leaking into the floor and walls, include waterproofing. Moreover, you surely don’t want to spend terribly for repairs that could have been prevented early on. No wet areas in any property should be left non-waterproofed.

Is there DIY waterproofing?

Of course there is and as we said earlier, tutorials abound on the Internet. But, we don’t recommend it.

In Queensland and New South Wales, you can have DIY waterproofing only if you are licensed to do the job. Not all states and territories require a license to handle waterproofing. However, the person you will hire to do it needs to present a written assurance that the work is fully compliant of the Australian Standard A 3740-2010 – ‘Waterproofing of domestic wet areas’.

Apart from all these, DIY should still be approved by a building inspector. Also, it may affect your insurance or warranty claims later on.

The requirements are strict because in Australia, poor waterproofing has brought huge damages to many properties in the past. You need to make sure that the right people are doing this job so you can prevent any serious damage and unwanted repair costs in the future.

How is waterproofing done?

Waterproofing here in Australia normally starts with applying a liquid rubber membrane on areas where water is present. This is an approach to seal the area against any water seepage.

With the use of “neutral cure” silicon, the first areas to be sealed are the edges and corners. A ‘polyfab’ bandage or polyester fabric is also applied to create a ‘bond breaker’.

The bond breaker is flexible and it aids in decoupling the waterproofing membrane at joins. This way, any small movements on the area will not destroy the membrane. It is also needed around penetrations through the waterproofing membrane, like tap outlets and drains.

Normally, the waterproofing membrane is applied under the edges of the bandage. This is to ensure that it is deeply submerged and appropriately adhered to the wall or floor. After which, using a roller, the membrane is painted on the walls and floors. Two coats are used: the second coat is rolled at right angles to the first coat. 

Which areas require waterproofing?

Every space where there’s a water outlet needs waterproofing. Basically, these are:

  • Bath area
  • Bathroom
  • Laundry area
  • Shower stall
  • Kitchen wet area
  • Taps, drains, etc.

The materials used in the area to be waterproofed will determine how high and wide the walls and floors will need to be waterproofed. For instance, in shower recesses, the normal waterproofing height is 1800mm. To determine how far the waterproofing membrane needs to extend on the wall and floor are based on these factors:

  • Shower stall size
  • Shower stall enclosure structure
  • Used of pre-moulded base

Same thing with the materials used on the bathroom floor, it will determine the requirements for waterproofing in this area. If a fibre cement floor is already in use, the concrete floors may be able to offer some sort of water resistance. However, if the floor is made up of timber-based materials like plywood or particleboard, full waterproofing is required.

How are tiles installed?

Tiling is made after the installation of waterproofing membrane. The mortar bed or screed for the shower needs to be installed first before tiles are put up.

These are the general stages of tiling process:

  • Selection of tiles – Different designs may be used on floor and walls. But you need to consider their slip resistance.
  • Tile pattern – Careful planning is needed on where the first tiles will be installed, and how they will be aligned with the floor and wall joints.
  • Tile cutting – They need to fit on the areas where it will be applied.
  • Application of thin set mortar or tile adhesive
  • Allowance for the setting of tiles
  • Removal of spacers between tiles
  • Application of grout on gaps
  • Clean up of remaining grout and debris
  • Waiting for grout setting

Tiling and Waterproofing Experts in Darwin

If you are in Darwin and you need tiling and waterproofing works, iTileNT is your best service provider.

We have more than 20 years of experience in tiling and waterproofing and have been serving the areas of Darwin, Palmerston, and Humpty Doo. iTileNT is a licensed wall and floor tiler and waterproofers.

Our team is more than capable of full bathroom renovations, from tile demolition, waterproofing, tiling, plumbing, to remedial waterproofing. You can be assured that our years of expertise can cover all your need for remedial waterproofing, including leaky balcony and shower and tile free bathrooms.

iTileNT also offers Clear Slip Resistant Coating to make any surface slip-resistant while retaining its appearance.

Call our friendly staff today and get a free quote:

+61 400729303
info@itilent.com.au
15 Wulagi Crescent, Darwin NT 0812 

post-images-resized-09

Should You Consider Terrazzo Tile in Your Flooring?

With different designs and properties in the market, choosing the perfect tiles for your home may come as a challenge. But this one particular type of tile flooring never loses its charm in the tiles market.

Terrazzo is a composite building material that is used for flooring, walls, countertops, or any custom products. Its consistent popularity is attributed to its overall versatility and durability. From corporate buildings to bathrooms or bedrooms, terrazzo is always among the best choices.

What’s in the Tile?

This trendy Italian terrazzo tile is composed of granite, quartz, marble, shell, or glass chips and many other compatible materials. To perfectly bind the materials together, a cement or epoxy matrix is used.

Terrazo tile has metal strips that create defined sections, transition of interesting colors, decorative patterns, and allows crack mitigation. Meanwhile, its divider strips are formed from aluminum (using epoxy terrazzo only), plastic, zinc, or brass.

Benefits of Terrazo Flooring

  • Provides a touch sophistication and aesthetics to any interiors
  • Uses recycled materials so it is guaranteed to support environmental protection
  • Wide variety of color and design
  • Easy to clean that only a sweep and mop is enough
  • Suitable to any home areas, both indoor and outdoor
  • Can be used with underfloor heating
  • Ultra durable that it can last to about 75 to 100 years 
  • Water-, stain-, mold-, and microbe-resistant

Drawbacks of Terrazo Tile

  • Relatively expensive compared with other flooring options in the market
  • Prone to cracking, which may be difficult to repair, if not installed properly
  • Maintenance requirements may be some sort of a challenge
  • On cold winter months, the flooring material may feel cold and hard

Historical Background

Terrazo’s history can be traced in Italy where marble was the primary choice of building material more than 500 years ago. Back then, Venetian workers used scrap fragments of marble they collected from their high-end projects. They used them to improve their own homes.

It is also believed that terrazzo is related to the seminato (seed) technique. In this approach, workers would throw huge chunks of marble chips into wet cement, which is set for grounding and polishing afterward.  This is where the generic form of the tile originated.

Though the popular belief is that Venetian invented terrazzo, archaeological evidences presented that such flooring has long been used in Turkey about 10,000 years ago.

Give it a Try

There’s a different sense of contentment when all your home renovation ideas come to life. If this is a project that you have already saved up for, you can consider using terrazzo tiles or your own tile of choice. When you do, opt for the professional and experts in tile installation in Darwin so you can be sure of a quality service.

This is where we come in at iTileNT. Send us an email or call us at +61 0400 729 303, 8:00AM to 5:00PM.


Sources:

https://terrazzco.com/what-is-terrazzo/
https://floorcritics.com/terrazzo-floor/

 

post-images-resized-18

Effective Ways of Cutting Bathroom Renovation Costs

When it comes to a particular section of your home, there is no doubt that your bathroom needs extra care. It’s easy to swoon with the Pinterest-worthy posts that don an extravagant bathroom renovation project. However, if you don’t have the funds to make your guilty pleasures possible, you can always find a way to minimize your spending.

For this bathroom renovation guide, we’ll discuss several ways of cutting your bathroom renovation costs.

Avoid Disarranging Your Existing Plumbing Footprint

When it comes to bathroom renovations, you might be interested in moving the shower from one point to another. If not, maybe the sink or the bathtub. However, plumbing concerns can be expensive and takes too much time to complete. Keep in mind that you don’t need a fancy arrangement for a bathroom renovation to be effective.

Don’t Underestimate a Fresh Coat of Paint

People wrongly assume that a bathroom renovation requires a new wall, a new floor, and a set of modern bathroom accessories. Although it wouldn’t hurt to ask for a tiled wall, this is not a considerable answer if you don’t have the budget for it. To save money, how about getting your walls splashed with a fresh coat of paint?

Splurge in One Area Only

If you can’t help but be inspired by what you see online, create a budget for a section of your bathroom that you want to be sparkling, magnificent, and stunning. For example, choosing to glam up your vanity requires you to keep your renovation efforts on other areas, a low-profile.

Little Tweaks Matter

When it comes to bathroom renovations, it doesn’t always have to be grand or magnanimous. Sometimes, what you need are the little details to make your bathroom pop. A change in the doorknob, faucet heads, and curtains can do. Moreover, you can add in a few pieces of artwork or intricate hand-crafted projects to make your bathroom feel and look like new.

Spicing Things Up With Lighting

Making your bathroom appear illuminated with a new shade of light can give off a unique vibe. Instead of a lightbulb to adorn your ceiling, how about purchasing a second-hand lampshade that you think is going to match your bathroom’s overall theme? You can also experiment with glow-in-the-dark stickers for a cheap and easy installation!

Final Words

When it comes to bathroom renovations, your creativity, and your budget must always be considered. These two factors determine your limitations and capabilities. However, you can always go the extra mile by being resourceful. The most important thing to remember about bathroom renovations is that the style must never compromise with function.

This article was originally published at ItileNT.

post-images-resized-19

Tips and Tricks to Renovate a Small Bathroom

Not every homeowner is given the luxury of having a big house. Because of this, a homeowner is driven to make economic decisions to fit the little space they have. If you are a homeowner who wants to maximize a bathroom’s small area and make it more stylish, here are our proven tips and tricks for a stunning bathroom renovation.

Have a Corner Sink

A bulky sink can make a bathroom feel less spacious and limits the natural foot traffic of a room. To make your bathroom appear roomy, it would help to install a corner sink. A corner sink minimizes the awkward situation of blocking the doorway.

Large Illusion from Large Patterns

If you want to make your bathroom look appear large, try investing on large patterned textures, wallpapers or tiles. When you install these large-scale patterns on a small bathroom, you’ll be surprised to see how big it can appear despite the small physical area.

Skip the Shower Door

Since you don’t have ample space for a fancy shower door, you can opt for a shower curtain. Shower curtains are relatively compact and do not take up much space when compared to shower doors. Moreover, it is more affordable than installing a shower door. You can look for a cute shower curtain design that fits your theme for a bathroom renovation.

Make Your Vanity Float

Floating vanities are not just cute. But, space savers as well. Freeing up the floor makes your small bathroom appear more extensive than it is. Also, you can utilize the freed space as a storage for small items.

Install a Wall-Mounted Faucet

Much like a floating vanity, a wall-mounted faucet frees up floor space. It may not be a traditional option, but you’ll be amazed at how spacious and stunning it can look for your small bathroom. What’s more, you can also try installing a wall-mounted faucet in any room of your house because its aesthetic is versatile and practical.

Extending the Sink Over the Toilet

If you want to have a touch of wooden aesthetics in your bathroom or a stone one, why not try extending your sink over the toilet? You don’t have to worry about your toilet space being compromised plus; you’ll have instant access to the sink.

Elongate The Mirror for Two

For not so generous spaces, every inch matters. If you want to enjoy the vanity without limiting its function to one area, you can always extend the mirror to fit the whole wall space. But, before going for this option, it is best to consult with an expert to assure its functionality and practicality.

Going for the traditional and popular bathroom renovation designs may not suit all bathroom areas. Although it can look good on paper, you must consider the area and the practicality of your plans before trying them.

This article was originally posted here.